Baby Sun Hat Tutorial

Materials


Baby sun hat pattern
1/2 yard of fabric (You may wish to use two different fabrics, one for the outside of the hat and one for the lining)
1" piece of 1/2" wide Velcro (I used 1" Velcro and cut it in half widthwise)
Thread
Sewing machine
Scissors or rotary cutter
Tape measure or ruler
Pinking shears
Sewing pins
Iron
Fabric marking pen

Download the free pdf pattern here
(Or right-click on the images below and save. Please note, this pattern is for personal use only.)

The pattern is sized 9 - 12 months (18" head circumference). Both pattern pieces include a 1/4" seam allowance. All seams are 1/4" unless otherwise noted. The first page of the pattern, the brim, will need to be printed on two sheets of paper and taped together. The easiest way to do this is to save the pdf and open up in Acrobat. In the print menu, under "Page Sizing and Handling", select "Poster". Make sure to print the pattern at full scale.

Instructions

Begin by tracing the pattern pieces for the crown lining only onto your fabric. You will need to cut 4 crown pieces out of the lining fabric.

Pin two of the crown pieces right sides together.

Sew and press the seam open.

Repeat for the other two crown pieces.

Place the two halves of the crown right sides together, pin, and sew along the top of the crown.

Trim and press seams and turn right side out. This would be a good time to fit the crown on your baby's head and make sure it fits well.

If it fits, you can now cut the rest of your pattern pieces. Cut 2 brim pieces from both your outer and lining fabrics, and 4 crown pieces from your outer fabric. You will also need to cut one 7" x 2" and one 8" x 2" strip of fabric for the chin straps.

Continue with the lining. Place the two brim pieces right sides together and pin each of the short ends. 

Sew each end together. 

Open up the brim and press the seams open.

Pin the crown to the inside opening of the brim, right sides together. Align the two pieces so that the brim seams hit in the middle of a crown piece. ie you want the brim seams to be at the sides of the hat and a crown piece to be centered at the front.

This is what it should look like on the outside when pinned together

Fold the 8" x 2" strip of fabric for one of the chin straps in half lengthwise and press. Open up and fold each half toward the middle. Press. Fold the top corners down to form a triangle, then fold the triangle down.

Fold in half lengthwise. Press and sew 1/16" to 1/8" in from the edge. Repeat for the 7" chin strap.

Mark a 2" opening in the back of the hat. It's very important to leave an opening so you can turn the hat right-side out after sewing the lining and the outside together.

Sandwich the chin straps in between the brim and crown, right at the seams on either side of the brim. Pin in place.

Sew the brim to the crown. Don't forget to leave an opening and make sure the straps are straight and not bunched up when you sew across them. Trim any excess from the raw ends of the straps.

Lining, turned right-side out. My scissors are there to show the 2" opening at the back, between the brim and the crown.

Repeat the above steps for the outside of the hat, omitting the straps and opening in the seam. 

Place the outside of the hat and the lining right sides together and push the crowns into one another so the brim sits flat on the table. Make sure the straps are tucked inside, away from the outer edge of the brim. Pin.

Sew around the outer edge of the brim.

Trim the edges of the brim with pinking shears. This will reduce the bulk in the seam and give a smoother curve when the hat is turned right-side out.

Turn the hat right side out. Sew the opening in the lining closed with a slip stitch. Topstitch around the edges of the brim and the crown, 1/16" to 1/8" in from the edge.

Take the soft side of the velcro and sew it to the inside of the longer chin strap. You want the soft side to be facing baby's skin so it doesn't scratch. Sew around all four edges of the velcro. Sew the other side of the velcro (the scratchy side) onto the outside end of the short chin strap.

To make the bow, cut a 4" square of fabric. Fold in half lengthwise and press. Stitch along the edge, leaving an opening in the center for turning. Clip the corners and trim the edges. Turn right-side out and press. Sew a basting stitch down the center of the bow and gather. Cut a 2" x 1.5" piece of fabric for the center of the bow. Fold in half lengthwise and press. Open and fold each half toward the middle. Press. Wrap around the center of the bow and hand stitch together at the back.

Hand stitch the bow to the base of the crown.

Since this hat is fully lined, it could easily be made reversible. All you would need to do is omit the chin straps and bow...

although it may not stay on baby's head long without the straps :)

You could also sew button holes on either side of the brim to pull the straps through. I'll probably try this for the next hat I make. If I do, I'll share it here on the blog.

UPDATE: Read the reversible sun hat post here.

Please let me know if you have any problems with the pattern or tutorial, and I would love to see pictures of any hats you make!

I heart Texas

Two dear friends got married this past weekend outside of Austin, Texas. To commemorate their union, and celebrate how great Texas is, I made them a throw pillow. The pillow case has an envelope closure and is made out of osnaburg fabric (leftover from my chair slipcover project) and wool-blend felt.

Congrats you two!

Miniature Garden Party

I've been wanting to make a miniature garden (also called a fairy garden) for a while now. Who can resist tiny lawn furniture and itty-bitty watering cans? Then I thought, hey, why not have a party and invite my friends to come make miniature gardens with me?

I purchased most of the containers at thrift stores and the garden decor from Ebay and Factory Direct Craft Supply. I made the mushrooms out of Sculpey polymer clay and the twig fences from twigs I gathered from the yard and a bit of wire.

I also printed out information cards for each of the guests.

The party was a lot of fun and all the gardens turned out so cute!

Want to throw your own miniature garden party? Let me know and I'll create a customized invitation package, emailed to you as a printable PDF, for just $4.99!

Crayon rolls

We have a couple of children's birthday parties coming up so I made some crayon rolls following Prudent Baby's tutorial. One of the things I did differently was to use fusible fleece instead of interfacing, and it worked well. It gives a little structure to the fabric but doesn't make it too stiff or thick. I also embroidered the birthday girl's name on the outside of the crayon roll. This was a really quick and easy project!

Bunny Slippers for Vera

Love this pattern!

Baby Tag Blanket Tutorial

Despite all the fun toys hanging from her activity gym, Vera was intrigued by the tag...until she ripped it off. That's when I decided to make her a tag toy. Here's what you will need to make your own baby tag blanket:

One 10" x 11" piece of cotton print fabric
One 10" x 11" piece of polka-dot chenille
One 10" x 11" piece of batting
Twenty 5" pieces of ribbon, different colors and sizes

Fold each 5" piece of ribbon in half. Pin onto patterned fabric, raw edges together. Pin five ribbons to each side of the square. Place batting on top then chenille on top of that, right side down. So you will have your cotton print, right side up, ribbons, batting, and chenille, wrong side up.

Sew around the edges with a 1/2" seam allowance, leaving an opening for turning. Clip corners and turn right side out. Push out corners with fabric turner and press. Sew opening closed with a slip stitch then top stitch around the edges about 1/2" in.

Chalkboard napkin rings

Want a napkin ring that also serves as a placeholder? All you need is a wooden napkin ring and some chalkboard paint!

I bought a package of 8 wooden napkin rings at my local craft store for a couple dollars. I painted the rings with watered down gray paint, let dry, then dry brushed white paint on top, wiping off the excess. The inner part of the rings got two coats of black chalkboard paint. Once the paint is dry you can personalize your napkin rings with a chalk marker or chalk. That's all there is to it!